KUKA YouBot

I just finished a 85 hour print, fortunately it just fail ones after the first couple layers,
the layer height is 0.06 mm.

The model is the KUKA YouBot in 1:2, it is a first shoot i modified the joints so they a re movable.

Super Phantom CAD

Working with fusion 360 on different models, one of them is the Super Phantom.

It is inspired from the B2, it has six board canons, lol, more like a flying fortress

auto canon 100 mm, grenade launcher 200 mm and big boy 400 mm.

No need to say that's oversize, clear if you thing about a tank canon which has 120 mm.

The whole thing is kind a science fiction.

Enjoy.

DIY Smoker

In 2015 i had the idea to build a Smoker, okay nice the first question was "What kind of Smoker should i build".

I did some sketches and also modeled some designs with a CAD program.

In the end i just started and let it run and came up with a barrel smoker, i used some old break disks as wheels and also some trash parts, the barrel himself is 16" diameter and has 17 mm thick walls, very unusual, but i found the old pressure pipe and felt in love with it. This guy is around 450 kg

It came out he is very good for smoking in the winter time, depending on the big walls.

A proud owner.

The final place.

The Rover

Started a new project, a mobile robot with Mecanum wheels.

The plan is to control all whit a Raspberry Pi 4.

Wanna integrate the electric drive in the wheels, not sure if i can use PCB ones.

First expression, will have more clearance than normal.
The design is like a cross with the platform for the robot.

I decided to move the robot more to the front axis to increase the front reach.

Added the axis and smoothed the profile.

In this step i changed the frame to have more clearance, but the nice X style is gone.

Also i created the first robot impression, 4 axis.

To get a complete picture i created the dummies for the wheels.
Looks not bad.

Self made leather purse

A hand bag, patterns by Tendy Leather