Blender industrial Robot animation

Blender industrial Robot animation, is a cell simulation possible?Downloaded the Cad file, prepared and rigged it in Blender. Teached the Key Frames/poses with an inverse kinematic.Blender as next Simulation Tool?
Here the clip

Karate Kata with own rig!

 https://www.artstation.com/artwork/J9E2WZ

Making a 3d printable Harmonic drive with Fusion 360

Modified Nanohack mask Respirator N95

Here my mod of the Nanohack.

Inhale, exhale and additional area to overlap and seal in the chin region. TPU print of the mask body.

Here the Link for download
On thingiverse.com
Or get it here!


Open Scource by
copper3d.com


How to built it:

1. Print the pieces with 20% infill, without support or rafts.

2. Heat the NanoHack to 55º-60º C with a hairdryer or hot water. The circular part has to be intact, that's why it's thicker so that it doesn't deform.

3. When softening, bring together the nose wings and adjustment wings located on the lower jaw. You can glue them to fix them better if you want.

4. Heat it up again and put it on your face for final adjustments. Make sure it's not too hot! If you feel that there is some part of the mask that does not fit well or is too tight, you can put a small piece of soft rubber in the contact areas.

5. Screw the "cover" on with one or two additional filters. If you use a filter, you can use a circular piece (single or double) of a conventional mask (nonwoven propylene) or add a round facial cotton pad for makeup. Half pad can make breathing easier.

6. Add the elastics/straps.

Sculpted my first scull in Blender

Facing currently my weakness in sculpting humans, first shoot is a skull, Blender is such a great tool it was really fun to work with it and after a couple of hours i ended up with this.

Let me know what you think?!

Back to Blender

Came back to Blender, like the changes with version 2.81 and i started to play with sculpting.

Here some results:

The reasond one i call it OldViking.

PavelP.

The First try ZackHead.

Creating the FFB trophy

Currently I'm printing the robot model i decided to combine the Fantasy Football Trophy with the video series and changed the FFB model and added the previously created joint. 

I also did two versions of the hand axis to check which works best.

One version has angled sides to help slip in for the A5.

The other version has a spitted A5 female side.

I had to remodel the FFB hand, the source of those two files is GrabCad

The whole model separated

Suspension system for the A2

Base, A1and A2

Both hand axis

 The angled version of the A5.

My Maker's Blog!!!

Hi guys,

this is the start of my Makers blog.
First a Printing project.

The picture in the background is a 50 mm sphere i printed, main use is for foot massage.
It is so strong you can stand on it. Designed in Blender prepared with Cura and printed on my Monoprice Maker Ultimate - MK11.



Here some printing values: